Common Motor Collective
Honda CB350 • CB360 • CB450 • CB550 | Parts • Info • Support
Orders Shipping | Tech Support Resumes July 23
Honda CB360 Stainless Steel 2pc Brake Lines

Honda CB360 Stainless Steel 2pc Brake Lines

review
5
0
5
Your Price: $100.00
In Stock
CMC Part Number:1026

Part 1
6 Banjo Fitting Crush Washers

Part: Honda CB360 Stainless steel 2pc brake lines

Why You Need This Part: These trick Honda CB360 stainless steel 2pc brake lines are a great upgrade over the stock rubber lines. Installation increases brake feel and response as the soft rubber lines are prone to bulging under pressure. If you are still running old cracked brake lines on your bike time to swap them out. These lines are made exclusively for CMC here in the USA and offer a clean alternative to universal kits. This is the best upgrade for the front brake along with our European made brake pads. We include both upper and lower lines and the 6 crush washers needed to finish the job. We've made the swap on our bikes, and the upgrade is noticeable. While you're tearing the brakes down it might be a good time to snag one of our master cylinder or disc brake caliper rebuild kits to tighten up the rest of the braking system.

Available Colors: Clear

Custom Colors: Blue, Red, Smoke (special order)

Upper Hose Length: Factory Handlebars

Installation Tip: Check your handle bar distance to the junction block. If you are in doubt about which hoses to order send us a message and we will help you out. Custom lengths and configurations are available, just ask!

Kit Includes:

  • Braided Stainless Steel Upper Hose
  • Braided Stainless Steel Lower hose
  • 6 Copper Banjo Bolt Sealing Washers

 

This Brake Line Fits These Honda CB360 Motorcycles
197419751976
360CB360GCB360TCB360T
5 Stars
Mr.
Bought the stainless brake lines for a 1976 CB360T I am restoring for my middle son. The upper and lower sections were the correct length and the lower hose connects directly to the caliper, eliminating that third joint to the inflexible metal line. Fit was exactly correct and the correct crush washers were included
Did you find this helpful?  4 of 5 Found Helpful
Reviewed by:  from New Jersey. on 11/3/2015
5
5 Stars
1975 CB360 Brakes
Great fit in combination with CMC headlight bracket and clubman bars. Installed CMC brake pads with disc caliper grease as recommended. Also purchased three banjo bolts. P.S. Big fan of YouTube channel!
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from San Francisco. on 6/6/2017
5
5 Stars
A Clean and Easy Upgrade
This part is a good improvement over the stock two rubber lines plus an awkward hard line down by the brake caliper. The part was the perfect length, the fittings (which do not swivel) are oriented exactly as they should be for the line to fit without twisting, and all parts are of good quality. Brake feel and effectiveness are much improved too! The front brake (with new pads) used to slow me down alright, but now hauling on the lever can get the front wheel locked up right quick! A small price to pay for safety, part longevity, and a slick setup.
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Kelowna, BC. on 10/25/2017
5

Related Items

Recently Viewed Items