The Points Situation: Modifications Necessary for Honda CB350, CL350, SL350, CB360, CL360 & CJ360 Ignition Points

Posted by Brenden on 5/16/2018 to CB350 / CL350 / SL350

The new supply of ignition contact points for the Honda CB350 / CB360 / CL350 Scrambler / CL360 Scrambler / SL350 & CJ360 must be modified for proper ignition timing adjustment. The old stock of Japanese-made ignition points for these motorcycles have pretty much dried up, and we have to turn to points made in China to keep our bikes alive. As is, the new points won't cut it, however with a few simple DIY mods they get the job done and your bike back in tune. Follow along and we will show you the modifications necessary to make these ignition points work right.

Honda CB350 / CB360 / CB450 / CB550 Motorcycle Battery Comparison: The Good, The Bad & The Ugly

Posted by Brenden on 5/2/2018 to CB350 / CL350 / SL350

With several styles and dozens of brands out there, it is hard to know which type of battery to use on your vintage Honda CB350 / CB360 / CB450 / CB550. We've put together a comparison guide of the main styles of batteries that you will encounter out in the market with the pluses and minuses of each style.

Honda CB350 / CB360 / CB450 CB350 How to Access and Clean the Oil Filter

Posted by Brenden on 4/25/2018 to CB350 / CL350 / SL350

The oil filter or oil "rotor" found on the Honda CB350, CB360 and CB450 often gets neglected during standard oil changes. It should cleaned out every other oil change at 3000 miles / 5000 km. Accessing the oil rotor for cleaning takes some engine disassembly and parts to complete the job correctly. Follow along as we show you how it is done.

Honda CB350 / CB360 Carburetor Diaphragm Installation Video

Posted by Brenden on 3/14/2018 to CB350 / CL350 / SL350

A video on how to replace your carburetor diaphragms on your Honda CB350 or Honda CB360.

Honda CL / CB350 Carburetor Rebuild Guide Part 2: Emulsifier Assembly, Float Height Adjustment & Jet / Float Bowl Installation

Posted by Brenden on 4/25/2017 to CB350 / CL350 / SL350

Our Honda CL350 & CB350 carburetor is ready to be reassembled. We begin by installing the critical parts in the float bowl area of the carburetor and getting the float height correctly set.

Honda CL / CB350 Carburetor Rebuild Guide Part 1: Identification / Parts Overview & Disassembly

Posted by Brenden M. on 4/7/2017 to CB350 / CL350 / SL350

The Honda CL350 & CB350 family of motorcycles used three different carburetors over the production run. We show you how to identify the carbs type, how to take them apart and which pieces you might need to replace during a rebuild.