COMMON MOTOR COLLECTIVE
Honda CB350 • CB360 • CB450 • CB500T • CB550 | Parts • Info • Support
Contact Us: Phone Orders & Technical Support
Free Shipping on USA Order Over $100 Exclusions Apply
Covid-19 Update: At this time we are continuing to fulfill orders at a reduced schedule, so please expect shipping delays of 5-7 business days. Thank you for your patience and continued support!
Honda CB450 Fork Seals: Standard 35mm
Honda CB450 Fork Seals: Standard 35mm

Honda CB450 Fork Seals: Standard 35mm

review
0
0
5
Your Price: $20.00
In Stock
CMC Part Number:8010
  • OEM Part:8010
  • Qty:Sold Individually

Part: Fork Seals Standard 35mm for Honda CB450, CL450 Scrambler, CB500T / CB500K, CB550 / CB750

Why You Need This Part: Fork seal replacement is the key to a proper fork rebuild on your vintage Honda and can even be installed with the fork tubes still in the triple tree. This is particularly beneficial in case you are working on your motorcycle in a place without workbench access (like in the driveway or on the streets).  Thes are what we call "standard style" fork seals, which are the same kind used in the factory. One pair per bike. Finish your fork rebuild with some dust boots, or fork gaiters and our tapered roller steering bearing your front suspension and steering will be butter.

Note: CB450 and CL450 models used various fork designs during their production run. Make sure to pick the proper seal size for your model. If in doubt contact us for help. Seals do not require spacers and may not necessarily look like the ones in the picture above. 

  • Will NOT fit CB450 K1-K3* / CL450 K1-K4 that use 35mm x 46mm seals
Will fit:
  • CB450 K3*-K7 / CL450 K5-K6 / CB500T use 35mm x 48mm seals
  • CB500 A-K2 / CB550K / CB550F use 35mm x 48mm seals
  • SL350 K2 use 35mm x 48mm seals

*CB450K3 models had a fork change mid production, the outer diameter of the seal must be measured to ensure the correct size is ordered.

Installation Tip: Lubricate the seals with fork oil during installation. A large circular punch (such as a short piece of pipe, stack of fender washers, etc.) will ensure the seal is pressed evenly into the lower fork tube. Drive the seals just deep enough to pass the snap ring groove and stop there. Factory spec on the fork oil varies on model, see list below. ATF (Automatic Transmission Fluid) is the factory specification for fork oil which is approximately 5W. We recommend a motorcycle specific fork oil: 10W (under 200 lbs rider) to 15W (200+ lbs rider) motorcycle. By using a heavier weight fork oil the front end of your bike well be will firmed up for better handling.

Fork Oil Capacity:

  • CB450 / CL450 K1-K2: 290CC / 9.8 Oz. per leg
  • CB450 / CL450 K3-K4: 225CC / 7.6 Oz. per leg
  • CB450 K5 / CL450 K5-K6: 160cc / 5.4 Oz. per leg
  • CB450 K6-K7: 140cc / 4.7 Oz. per leg
  • CB500T: 140cc / 4.7 Oz. per leg
  • CB500K: 170cc / 5.75 Oz. per leg
  • CB550K& F: 190cc / 6.4 Oz. per leg
These Standard Fork Seals Will Fit the Following Honda Motorcycles
1969197019711972197319741975197619771978
450
500T
CB450K3*CB450K4CB450K5CB450K6CB450K7CB500TCB500T
CL450K5CL450K5CL450K6
500F
550
CB500K0CB500K1CB500K2CB550K0CB550K1CB550KCB550KCB550K
CB550FCB550FCB550F
750CB750K0CB750K1CB750K2CB750K3CB750K4CB750K5CB750K6CB750K7CB750K8CB750K
CB750F0CB750F1CB750F2CB750F3
CB750ACB750ACB750A

5 Stars
No leaks
They’re in and sealed. Pretty easy. I used the old seals and tapped them right in.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by: (Verified Buyer)  from Birmingham. on 2/5/2019
5
5 Stars
Great seals
The seals fit great and look to be good quality
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Grand Rapids, MN. on 6/21/2019
5

Related Items

Recently Viewed Items