Part: Honda CB200 / CL200 Oil Seal Kit
Why You Need This: After finally cleaning all the old oil and gunk from your vintage CB200 / CL200 motorcycle you realize that spots are still showing up all over your garage floor. These motorcycles are not known to be endlessly leaky so the likely culprit is your 40+ plus year old oil seals. Fortunately, we have OEM quality replacements for all the oil seals on your CB200 Cafe Racer / CL200 Scrambler builds. If you are doing any type of major engine work this kit should be on your must-have list along with one of our overhaul gasket kits, Hondabond 4, stainless steel allen bolt kits and anti-seize.
- Shift Lever Seal (#4212)
- Tachometer Drive Seal (#4097)
- Clutch Lifter Seal (#4136)
- Output Shaft Seal (#4127)
- Neutral Light Switch Seal (#4098)
- Camshaft Seal (#4126)
- Transmission Shaft Seal(#4137)
Installation Tip: When removing the old oil seals take care to not gouge the seats. After carefully cleaning the seat, apply a small amount of Hondabond 4 to the outer circumference of the seal for good measure. Tap the seals into place using a socket slightly smaller than the outer diameter as a driver.