Honda CB350 / CB450 Oil Drain Plug

Part: Honda CB350 / CB450/ CB500T Oil Drain Plug

Why You Need This: Chances are if you take a look at that old oil drain plug on your Honda CB350, CB450, CB500T you will see how chewed up it has become over the years. Improper oil changes by some knuckle dragger with the wrong wrench may have destroyed the nut and sometimes even damage the threads of the plug. It is just another level of frustration that you don't need to deal with. Get rid of those troubles with a new oil drain plug with sealing o-ring that will fit perfectly on your Honda CB350 or CB450. Drain plugs are custom made for us here in the USA from 4130 chromoly steel, coated in silver high temp engine paint. If you are going fancy check out our Black Hole drain plug. Button up any other oil leaks with a service gasket kit or oil seals might be what you need to stop the drip.

Installation Tip: Ensure the rubber o-ring sits well and level on the inside of the plug and do not over tighten. You should be changing the oil in your bike every 1,500 miles and clean out the oil filter every three oil changes.