Part: Honda CB360 / CL360 / CJ360 Carburetor O-Ring Kit
Why You Need This: OK, you have rebuilt the carburetors on your Honda CL360 / CJ360 / CB360 and need to tear back into them for some adjustments. There is no need to pony up for a full carburetor rebuild kit when you just need the O-rings. We got your back and we put together this carburetor O-ring kit to make things easier. If the brass parts in your original Keihin carburetors found on all the CL, CJ and CB360 are in good shape this is all you need to get your bike running again (assuming the slide diaphragms and intake manifolds are good working order). Perfect for main jet adjustments, one kit will rebuild two carburetors.
Tip: Set your float height to 16mm . The suggested factory 18mm setting causes the fuel level in the bowl to be too low.
- Float Bowl O-Ring (x2)
- Needle Seat O-Ring (x2)
- Drain plug O-Ring (x2)
- Idle Mixture Needle O-Ring (x2)
This Carburetor O-Ring Kit Fits These Honda Motorcycles