Part: Honda CL360 Scrambler / CJ360 / CB360 Carburetor Throttle Shaft Plugs - Sold In Pairs
Why You Need This: The plugs at the end of the throttle shafts of the Honda CL / CJ / CB360 carburetor are known to fall out and cause an air leak thus tuning problems for your engine. If you see a small hole at the end of the throttle shaft (twist the throttle grip and look for movement), then the factory plugs are missing. We have the fix for this problem - a pair of aluminum throttle shaft plugs. Sold as a pair, these throttle shaft caps are designed for the factory Keihin carburetors found on the Honda CL360 / CJ360 / CB360 family of bikes, and are a Common Motor exclusive.
If you still feel that your Honda CB360 has fuel system performance issues, take a look at our carburetor rebuild kits, carburetor diaphragms, main jet tuning kit, and synchronization kit.
Installation Tip: Coat the outer diameter of each plug with some thin gasket sealer such as Gasgacinch and use a small socket as a driver to tap the plugs squarely into place.
