Part: Honda CL/ CJ /CB360 Secondary Main Jet Carb #68 - Sold in Pairs
Why You Need This: There are two different main jets in the Honda CL / CJ / CB360 factory Keihin carburetors: The main "needle" jet (T shaped) and the secondary main jet (plug like with threads on the outside). If you have rebuilt your carburetors at any point with a carburetor rebuild kits then you know that the secondary main jet is the only jet that ends up being reused. This means that it is the one bound to be chewed up the most after a long time or even missing. In a different case, it might have been drilled out larger in size by a previous "cafe racer expert" in an attempt to properly tune the carburetor (yes we have seen it). Whatever the reason might be, this is the correct size secondary main jet for your Honda CL / CJ / CB360 and you can go ahead and grab a pair or use them to compliment our carburetor rebuild kit and main jet tuning kit should you want all the jets brand new. Secondary main jets are sold in pairs.
Installation Tip: To ensure maximum performance, the carburetors have to be cleaned really good. When installing, use the right size screwdriver to fit the slot as snugly to avoid damaging the jet. Do not over-tighten as the brass is soft.