Part: Bleeder Screw for Honda CB350G / CB350F / CB360T / CB350F / CB400F / CB450 K3-K7 / CB500T / CB500K / CB550K/F / CB750K0-K7 motorcycles
Why You Need This Part: The Honda bleeder screw is often broken, missing or clogged. If this is what you are dealing with on your brake caliper then worry not, a new and improved bleeder screw is here.
We offer the bleeder screw in three different types:
Standard: A basic but high quality bleeder screw.
Premium: This is a speed or "E-Z" style bleeder screw, which means it has an internal check valve to make bleeding a snap. The open and close game of bleeding your brakes just got as lot easier and quicker. A significant upgrade from the factory bleeder. This is available for late style calipers only. Both styles of bleeder screw are sold individually or with our caliper rebuild kit.
*Early Style: Similar to our standard bleeder screw, but made for early style calipers on the Honda CB450 K3&K4 and CB750 K0-K7 models.
Installation Tip: For the premium bleeder screw, have the bleeder screw open just enough to get some flow out the top, usually about 1/2 turn out from seated. Use some clear vinyl tubing to see what is going on and watch the bubbles be worked out. The internal check valve keeps air from being pulled back into the system.
