Part: LED Light Bulb Upgrade Kit for Honda CB175, CL175, SL175, CB200, CL200, CB350, CL350, SL350, CB360, CL360, CJ360, CB450, CL450, CB500T, CB500K, CB550K, CB550F, CB750 motorcycles.
Why You Need This: The inefficient incandescent light bulbs in the turn signals, tail light and gauges have been taxing our bikes' electrical systems for years. Some of these the bulbs are getting hard to find these days which makes matters even more complex. Fear not as our LED light bulb upgrade kit will not only modernize the lights on your bike but also reduce the load on the charging system (like two birds with one stone...). This configuration took us a good while to collect all of the pieces to so trust us, it is a great upgrade. Maximize the brightness and minimize charging system load; your Honda CB350 / CL350 Scrambler / CB360 / CL360 Scrambler / CB450 / CL450 Scrambler / CB500T / CB550 charging system and your battery will thank us. When paired with our regulator / rectifier kit, these are some of the best electrical upgrades you can do for your Honda.
NOTE: These replacement LED bulbs are designed to be used in the original factory turn signals, tail light and gauge bulb sockets. May not fit non factory replacement or universal lights.
- LED Gauge / Instrument Bulbs x 7
- LED Turn Signal Bulbs x 4
- LED Tail Light Bulb x 1
- Low Threshold "Electronic" Flasher Relay
- Diode kit to make LED bulb work with the turn signal indicator
CB500T / CB550 / CB750 Owners: Your bikes use what we call the "deluxe" Honda gauge cluster. In addition to the usual 7 LED indicator bulbs you need 2 more for the additional turn signal indicator and oil pressure light to fully switch over to all LED's.
Installation Tip: Clean your connectors and sockets well to remove any corrosion. The diode is used to convert the turn signal indicator to use an LED. Connect the The red wires of the diode to the light blue and orange wires of the turn signal wires coming out of the harness. The blue wire of the diode connects to "positive"side of the gauge bulb socket. Positive will be the wire that makes contact at the center pin of the bulb. The other wire on the gauge bulb socket makes contact via the side the bulb. This wire needs to now be connected to ground (any solid dark green wire).