Part: Honda CB350 / CB360 Fork Seals
Why You Need This Part: So here before you are a pair of 33mm standard style fork seals for your Honda CL350 / SL350 / CB350 or CL360 / CJ360 / CB360. OEM quality seals from Japan just like Honda used when your bike was new. They work very well, just need a little extra finesse when installing them. These fork seals are a thriftier option to the EZ install fork seals. Get some fork dust boots and you are set.
Installation Tip: Lubricate each seal with fork oil during installation. The factory spec fork oil is 140CC / 4.7Oz. per leg of ATF (Automatic Transmission Fluid), however, we recommend a 10W to 15W fork oil available at most motorcycle shops. ATF is approximately 5W and extra viscosity is provided by the heavier weight oil with firm up the front end a little. A large socket or piece of pipe works well as an installation tool.
*This seal should also work on a Honda CB450 K0 "Black Bomber"
Installation Guides: Honda used two different fork architectures between the CB350 / CB360 families of motorcycles. Refer to our full installation guides below for step-by-step instructions to rebuild the forks on your specific motorcycle.
COMMON MOTOR COLLECTIVE
COMMON MOTOR COLLECTIVECOMMON MOTOR COLLECTIVE