COMMON MOTOR COLLECTIVE
Honda CB175 • CB200 • CB350 • CB360 • CB450 • CB550
Parts • Info • Support

Free Shipping on most USA Orders Over $100
Honda CB175 / CB200 Shockwave Electronic Ignition System
Honda CB175 / CB200 Shockwave Electronic Ignition System

Honda CB175 / CB200 Shockwave Electronic Ignition System

Your Price: $180.00
Add To Cart For Stock Check
CMC Part Number:3204
  • Replaces OEM Part:30200-235-154, 30200-235-015, 30201-235-004, 30201-235-015, 30202-107-004, 30202-107-154, 30202-216-004, 30202-216-005, 30903-216-000, 93500-05012-0A, 94101-04000, 94111-04000, 93500-04005-0A, 93500-04006, 93500-04006-1A, 30280-237-154, 30280-237-005
  • Qty:Sold as Kit

UP: CB175 / CB200 Shockwave Sensor Plate - (#3203)
(#3203) x1
Optional Add-On Parts:
Combo Regulator Rectifier (#3023) [+$60.00]
Ignition Coil (#3194) [+$52.00]
Regular Spark Plug Boots 2x (#3009) [+$8.00]
CB175 Spark Plugs 2x (#3033) [+$8.00]
CB200 Spark Plugs 2x (#3184) [+$8.00]
UP: CB175 / CB200 Shockwave Sensor - (#3219)
(#3219) x1
UP: Shockwave Trigger Module - (#3218)
(#3218) x1
UP: Sensor Mounting Screw ( Button Head) - (#3224)
(#3224) x1 - Already included with Sensor
UP: Sensor Plate Mounting Bolt - (#12201)
(#12201) x2
UP: Mounting Plate Stainless Steel Washer - (#12200)
(#12200) x2
UP: Module Retainer Plate - (#3227)
(#3227) x1
UP: Module Bracket Standoff (Short) - (#3238)
(#3238) x4
UP: Module Bracket Screw for Stand Off - (#3229)
(#3229) x8
UP: Module Mounting Plate (175/350/450) - (#3230)
(#3230) x1
UP: Heat Shrink 1/4 Wide at 24 inch Length - (#3100)
(#3100) - Cut into 11 inch (x2) and 2 inch (x1)
UP: Thermal Heat Sleeve 1/4 at 8 inch length - (#3196)
(#3196) - 8 inch (x1)
UP: Red Posi-Lock 18-24 Gauge Connector x2 - (#3234)
(#3234) x2
UP: Blue Posi-Lock 14-16 Gauge Splice Connector x1 - (#3235)
(#3235) x1
UP: Allen Hex Wrench 2.5mm - (#3236)
(#3236) x1
UP: Shockwave Sensor Support Spacer
(#3237) x1
UP: Zip-Tie (6 inch) x4
(#3248) x4
UP: Zip-Tie (4 inch) x1
(#3244) x1
UP: Cable Grommet
(#3247) x1
UP: M6 x 60mm Bolt
(#3246) x2
UP: M6 Flat Washer
(#3239) x4
UP: M6 Nut
(#3240) x6
UP: M6 Split Washer
(#3241) x2
UP: M8 Washer
(#3245) x1

Part: Shockwave Electronic Ignition System for Honda CB175 / CL175 / SL175 / CB200 / CL200

Why You Need This: Ever since Common Motor Collective released the Shockwave electronic ignition system for the Honda CB350, we have been working to expand the Shockwave lineup to include all the vintage Hondas that we support. The Shockwave is the product of over 3 years of R&D and 10,000+ real road miles of testing, We are proud to present to the Shockwave Electronic Ignition System for the two cylinder Honda CB175 / CB200 family of motorcycles.

The Shockwave replaces the ignition points and condenser on the Honda CB175, CL175 Scrambler, SL175, CB200, or CL200 Scrambler series of motorcycles. Never change or adjust points again. The Shockwave allows for more accurate and stable ignition timing which means your bike will start easier, run and idle smoother.

Features:

  • Integrated LED's for static ignition timing and system operation motoring
  • Epoxy Sealed electronic components for resistance to heat and moisture
  • High temp silicone covered stainless wires (on sensors)
  • Complete mounting system for a seamless clean installation on your bike
  • Easy electrical connection with minimal modifications
  • Electronic components manufactured in Europe / Machined aluminum parts made in Houston, TX USA
  • Advance / Retard index marks on sensor plate for easier adjustment
  • Works with stock ignition coil
  • Retains the factory spark advance mechanism
  • Fits under the factory points cover
  • Full 12 month warranty (from day of delivery)*

NOTES:

1) *Warranty is only valid if your CB175 / CB200 is running a Common Motor #3023 combo regulator rectifier (besides you should be running one anyway as it is the single best electrical upgrade you can do to your bike!) If you have not upgraded yet, you can purchase one now with the Shockwave at a discount price. Early CB175 / CB200's do not have a voltage regulator and later bikes that are equipped with one are very prone to failure. A voltage spike from a defective original (or non-existent) voltage regulator can potentially damage the electronic components of the Shockwave. Hence our requirement for a new unit to be in place to avoid such damage.

2) The Shockwave will work with stock ignition coil with a minimum resistance of 3.5 ohms. If you want to put on a fresh coil on select it from the option parts. A new set of CB175 spark plugs or CB200 spark plugs will round out the package.

Installation Tip: Watch all the installation videos to make the process as easy as possible. You will need a set of feeler gauges to set sensor positions. A strobe-style automotive timing light is recommended to check the final ignition timing once the engine is running.

Installation & Technical Documentation Download & Videos

This Allen Bolt Kit Fits These Honda Motorcycles
196819691970197119721973197419751976
175CB175K0CB175K3CB175K4CB175K5CB175K6CB175K7
CL175K0CL175K3CL175K4CL175K5CL175K6CL175K7
SL175K0SL175K1SL175K1
200CB200K0CB200K0CB200TCB200T
CL200

Related Items

 
 

Recently Viewed Items