"Shockwave" Electronic Ignition Kit | Honda CB350 / CL350 / SL350
'Shockwave' Electronic Ignition Kit | Honda CB350 / CL350 / SL350

"Shockwave" Electronic Ignition Kit | Honda CB350 / CL350 / SL350

Your Price: $200.00
Select Options
CMC Part Number:K3200
  • Replaces OEM Part:30203-286-004, 30203-369-154, 30204-286-004, 30202-369-154, 30203-292-003, 30203-292-154, 30204-292-003, 30204-292-154, 30280-292-672, 30280-292-671, 30280-292-672, 30250-369-004, 30250-369-003, 30280-371-000,
  • Quantity:Sold as Kit

Optional Add-On:
Combo Regulator Rectifier (#3023) (+$60.00)
Ignition Coils 2x (#3058) (+$98.00)
Spark Plug Boots 2x (#3009) (+$8.00)
Spark Plugs 2x (#3015) (+$8.00)
UP: 350 Sensor Plate
(#3210) x1
UP: Blue Sensor
(#3220) x1
UP: Green Sensor
(#3221) x1
UP: Blue Module
(#3222) x1
UP: Green Module
(#3223) x1
UP: Sensor Mounting Screw (Button Head)
(#3224) x2 - Already included with each Sensor
UP: Sensor Mounting Bolt
(#3225) x2
UP: Mounting Plate Stainless Steel Washer
(#3226) x2
UP: Module Retainer Plate
(#3227) x1
UP: Module Bracket Standoff (Long)
(#3228) x4
UP: Module Bracket Screw for Stand Off
(#3229) x8
UP: Module Mounting Plate
(#3230) x1
UP: Heat Shrink 1/2" W x 12" L
(#3231) 10" (x1) & 2" (x1)
UP: Thermal Heat Sleeve 3/8" (9 mm) at 8"
(#3232) x1
UP: Red Posi-Lock 18-24 Gauge Connector
(#3234) x4
UP: Blue Posi-Lock 14-16 Gauge Splice Connector
(#3235) x2
UP: Allen Hex Wrench 2.5 mm
(#3236) x1
UP: Sensor Support Spacer
(#3237) x2
UP: Zip-Tie (6")
(#3248) x4

Part: Shockwave Electronic Ignition System for Honda CB350 / CL350 / SL350

Why You Need This: For years we have been looking for a quality electronic ignition system for our beloved Honda CB350 twin-cylinder motorcycles. After testing several market offerings, the shortcomings quickly became clear. If we wanted an electronic ignition system for the Honda CB350 and CL350 motorcycles we needed to design our own. After 3 years of R&D, plus 10,000 real road miles of testing, we are happy to present the Shockwave Electronic Ignition System. The Shockwave replaces the two sets of ignition points and condensers for the Honda CB350, CL350 Scrambler, or SL350 series of motorcycles. Never change or set points again. The Shockwave allows for more accurate and stable ignition timing; that means your bike will start easier, and run smoother especially at idle speeds.


  • Integrated LED's for static ignition timing and system operation motoring
  • Epoxy Sealed electronic components for resistance to heat and moisture
  • High temp silicone covered stainless wires (on sensors)
  • Complete mounting system for a seamless clean installation on your bike
  • Easy electrical connection with minimal modifications
  • Electronic components manufactured in Europe / Machined aluminum parts made in Houston, TX USA
  • Advance / Retard index marks on sensor plate for easier adjustment
  • Works with stock ignition coils
  • Retains the factory spark advance mechanism
  • Fits under the factory points cover
  • Full 12-month warranty (from day of delivery)*


1) *Warranty is only valid if the bike is running a Common Motor #3023 combo regulator rectifier (besides you should be running one anyway as it is the single best electrical upgrade you can do to your bike!) If you have not upgraded yet, you can purchase one now with the Shockwave at a discount price. Early CB350's and CL350's do not have a voltage regulator and later bikes that are equipped with one are very prone to failure. A voltage spike from a defective original (or non-existent) voltage regulator can potentially damage the electronic components of the Shockwave. Hence our requirement for a new unit to be in place to avoid such damage.

2) The Shockwave will work with stock ignition coils with a minimum resistance of 3.5 ohms. If you want to put a fresh set in with your Shockwave you can also purchase a set at a discount price as well. We suggest the angled spark plug boot for a better fit. A new set of spark plugs will round out the package.

Installation Tip: Watch all the installation videos to make the process as easy as possible. You will need a set of feeler gauges to set sensor positions. A strobe-style automotive timing light is recommended to check the final ignition timing once the engine is running.

Installation & Technical Documentation Download & Videos

This Shockwave Electronic Ignition System Fits These Honda Motorcycles

Related Items


Recently Viewed Items