COMMON MOTOR COLLECTIVE
Honda CB350 • CB360 • CB450 • CB500T • CB550 | Parts • Info • Support
Contact Us: Phone Orders & Technical Support (No Tech Phone Support Until Dec 9th)
Free Shipping* on USA Order Over $100 - Exclusions Apply
Honda CB360 / CL360 Scrambler / CJ360 Engine Overhaul Bundle

Honda CB360 / CL360 Scrambler / CJ360 Engine Overhaul Bundle

Your Price: $254.00
Retail Price:$283.00
Your Savings:$29.00(10%)
In Stock
CMC Part Number:OVRHLBNDL2
  • Replaces OEM Part:91301-426-010, 91301-393-000, 91307-369-000, 91309-286-000, 11691-286-306, 11691-286-000, 11394-369-306, 11394-369-000, 16229-369-306, 16229-286-000, 16229-369-000, 12329-369-306, 12329-369-000, 30372-369-306, 30372-369-000, 11395-369-306, 11395-369-000, 91304-369-000, 12909-428-003, 12909-333-000, 91302-001-020, 15129-369-000, 18291-286-306, 18291-286-000, 91354-371-000, 91354-702-000, 91312-107-000, 12210-362-005, 12251-369-306, 12251-369-000, 12191-369-306, 12191-369-000, 91210-286-003, 91206-286-013, 91201-324-010, 91201-324-013, 91201-324-023, 91203-292-005, 91205-333-015, 91202-286-023, 91202-286-025, 91204-286-003, 13011-369-305, 94601-16000, 93500-06040-0A, 93500-06040, 93500-06025-0A, 93500-06025, 93500-06035, 93500-06035-0A, 93500-06055-0A, 93500-06055, 93700-06040-0A, 93715-06040, 93700-06040

Overhaul Gasket Kit
#4003
Oil Seal Kit
#4013
Standard Piston Rings
#4034 x 2
Wrist Pin Clips
#4071 x 4
Upper Bolt Kit
#4047
Lower Bolt Kit
#4024
Honda Bond Gasket Sealer
#9012
Optional Add-On: CB360 Cylinder Hone
#9016 [+$38.00]
Optional Add-On: Tools
Rotor Puller (#9000) [+$13.00]
Impact Driver (#9018) [+$17.00]
Oil Filter Nut Tool (#9005) [+$13.00]
Valve Spring Tool (#9022) [+$35.00]
Snap Ring Pliers (#9049) [+$13.00]
Optional Add-On: Micrometers
0-1" Micrometer (#9036) [+$18.00]
2-3" Micrometer (#9037) [+$22.00]
Optional Add-On: Gauges
Telescoping Snap Gauge (#9038) [+$27.00]
Small Hole Gauge (#9039) [+$27.00]
Dial Bore Gauge (#9040) [+$72.00]

Part: Honda CB360 / CL360 Scrambler / CJ360 Engine Overhaul Bundle

Why You Need This Part: While the Honda CB360 / CL360 Scrambler / CJ360 Engine are stout little machines, after thousands of miles travelled the engine will need to be overhauled. The winter time is prime If you've ready to dive in and take the engine and transmission down to its essential parts. We have make the job easier and assembled a basic overhaul kit with the parts that will need to swapped out to do a complete job. Sure you may not need a new cam chain tensioner or valves, but gaskets, seals and rings all should be replaced during this service.

Honda CB360 / CL360 Scrambler / CJ360 Engine Overhaul Bundle Includes:

  • Overhaul Gasket Kit #4003
  • Oil Seal Kit #4013
  • Standard Bore Piston Ring set x 2 #4034
  • Wrist Pin Retaining Clips x 4 #4071
  • Deluxe Stainless Steel Allen Bolt Kit #4047
  • Three Bond Gasket Sealer #9012

Optional Tools @ Discount Prices:

  • Cylinder Hone (CB / CL / CJ 360) #9016
  • Impact Driver #9018
  • Rotor Puller #9000
  • Oil Rotor Nut Tool #9005
  • Valve Spring Compressor #9022
  • 0-1" Micrometer #9036
  • 1-2" Micrometer #3037
  • Telescoping Snap Gauge #9038
  • Small Hole Gauge #9039
  • Dial Bore Gauge #9040
  • Snap Ring Pliers #9049

Installation Tip: Clean your sealing surfaces well and scrap off all pieces of the old gaskets material with any blobs of gasket sealer that have been generously used. A  coat of white grease will keep gaskets that get removed frequently from sticking (side covers) Measure the ID of the cylinders to see if they are within service limits, see page 112 onward in the factory service manual. If so then cylinders can be honed to seat the new rings.Use motor oil when honing the cylinders and wash thoroughly in hot water and dish soap after to remove all honed residue. Top and bottom rings are the same, orient them with the index mark facing upwards. The impact driver will make quick work of the original JIS Phillips screws from the crankcase, which will be replaced by the stainless steel Allen bolts. Apply anti-seize on the threads of the bolts when installing.

This Honda Overhaul Bundle Fits These Honda Motorcycles
1974197519761977
360CB360GCB360TCB360T
CL360K0CL360K1CJ360TCJ360T

Related Items

 
 

Recently Viewed Items