Part: Wheel Bearing & Seal Kit for Front Disc Brake equipped Honda CB200 / CB350G / CB360 / CB450 K3-K7 / CB500T / CB500K / CB550 / CB750 K0-K6
Why You Need This: We often see that wheel bearings are an ignored service item on vintage Honda motorcycles. Bad wheel bearings can lead to serious steering and handling problems on your motorcycle. If you find that the front wheel has lateral play (back and forth movement perpendicular to the axle), is not turning smoothly or the bearings feel "crunchy" or leaking grease, it is time to replace the bearings.
Luckily, our kit makes it easy to change the front wheel bearings of your Honda CB200, CB360, CB450, CB500, CB550, or CB750. They are guaranteed to fit and give excellent performance. The kit includes two pre-lubricated European made wheel bearings and a new dust seal to keep road dirt out. Now your bike will roll smooth like butter! If you are working on the front end of your bike make sure your brake caliper is in tip top shape too!
Note: This is the bearing kit for the Honda CB350G that uses a front disc brake hub.
Installation Tip: Apply heat with a heat gun to help remove the old bearings. They will need to be driven out using a long punch. A little heat on the hub will also help install the new bearings. Get the hub hot and press the new bearings in. Use a large socket or a piece of tubing that it is about the same diameter of the bearing's outer race as a driver. Never push on the inner race or blue dust seal, it will damage or destroy the bearing.