Part: Honda CB360 / CL360 Side Covers
Why You Need This: Plastic side covers for the Honda CB360 & CL360 are Notoriously missing on the vast majority of bikes out there. Finding a clean set is next to impossible. If you have a CL360 this just gets even more difficult! The vast majority of the plastic side covers that are around typically are cracked or have other broken parts on them.
The good news is that we have some new reproduction side covers available for both the CB360 and CL360. Covers come as raw plastic, and will have to be primed and painted to match your tank. Covers are made in the USA and are pre-drilled to accept the original style badges for each model of bike. Right side covers are the same between the two models, where the left side cover is different between the bikes. Note these covers will not fit the Honda CJ360. Badges, and rubber grommets are not included with the covers. If you are looking for CB360
factory style air filters we have those as well.
Installation Tip: Covers will need to be primed and sanded smooth before painting. We recommend using a quality automotive paint and primer applied via a paint gun rather than spray paint from a rattle can.
