COMMON MOTOR COLLECTIVE
Honda CB350 • CB360 • CB450 • CB500T • CB550 | Parts • Info • Support
Call Us: (832) 356-7670 - Tech Support Mon & Tues 12 - 6 PM CST
FREE SHIPPING on USA orders over $100 - Exclusions Apply
Honda CB450 / CL450 Scrambler / CB500T Engine Overhaul Bundle

Honda CB450 / CL450 Scrambler / CB500T Engine Overhaul Bundle

Your Price: $257.00
Retail Price:$286.00
Your Savings:$29.00(10%)
In Stock
CMC Part Number:OVRHLBNDL3
  • Replaces OEM Part:13011-375-005, 13011-292-000, 13115-283-000, 94601-17000, 94601-17000, 13115-283-000, 91301-426-010, 91301-393-000, 91309-286-000, 91312-PC6-003, 91305-283-000, 91355-415-000, 91307-283-000, 91304-HB3-003, 91302-943-003, 91302-200-000, 11394-292-306, 11394-292-010, 11394-292-000, 11691-283-306, 11691-283-000, 16229-283-306, 16229-283-010, 30391-283-306, 30391-283-010, 12393-283-306, 191202-283-013, 91205-200-000, 91207-222-000, 91204-283-000, 91205-283-015, 91201-292-003, 91203-292-0032393-283-010, 12316-283-306, 12316-283-310, 11395-283-306, 11395-283-000, 12191-283-306, 12191-283-315, 12191-283-010, 30392-283-306, 30392-283-000, 12394-283-306, 12394-283-000, 14591-283-306, 14591-283-000, 18291-MM8-880, 18291-283-010, 18291-283-306, 12251-283-306, 12251-283-020, 12251-283-010, 91315-PY3-000, 91314-220-000, 91302-283-003, 1302-283-000, 12209-283-000, 12909-428-003, 12909-333-000, 12909-283-000, 91301-PC9-003, 91308-283-000,91305-KT7-003, 91303-283-000

Cam Gear Cushions x 4
#4090 [+$28.00]
Overhaul Gasket Kit
#4035
Oil Seal Kit
#4038
Standard Piston Rings
#4083 x 2
Wrist Pin Clips
#4084x 4
Deluxe Bolt Kit
#4132
OEM Rivet Style Master Link
#4460
Three Bond Gasket Sealer
#9012
Optional Add-On: CB450 Cylinder Hone
#9017 [+$38.00]
Optional Add-On: Tools
Rotor Puller (#9000) [+$13.00]
Impact Driver (#9018) [+$17.00]
Oil Filter Nut Tool (#9005) [+$13.00]
Valve Spring Tool (#9022) [+$35.00]
Snap Ring Pliers (#9049) [+$13.00]
Cam Chain Tool (#9001) [+$49.00]
Optional Add-On: Micrometers
0-1" Micrometer (#9036) [+$18.00]
2-3" Micrometer (#9037) [+$22.00]
Optional Add-On: Gauges
Telescoping Snap Gauge (#9038) [+$27.00]
Small Hole Gauge (#9039) [+$27.00]
Dial Bore Gauge (#9040) [+$72.00]

Part: Honda CB450 / CL450 Scrambler / CB500T Engine Overhaul Bundle

Why You Need This Part: Honda Honda CB450 / CL450 Scrambler / CB500T Engines are one of the most interesting engines built in the 1960's. With dual cams, torsion bar valve springs and a redline of over 9000 RPM these machines ran circles around the British bikes at the time. Alas after close to 50 years later you might be finding that the top end on your twin cam marvel need to be freshened up a bit. We have made the job easier for you and assembled a basic overhaul kit with the essential parts that are need to do a proper rebuild. Pistons and valves can often be used again but gaskets, seals and rings all should be replaced during this service.

Honda CB450 / CL450 Scrambler / CB500T Engine Overhaul Bundle Includes:

  • Overhaul Gasket Kit #4035
  • Oil Seal Kit #4038
  • Standard Bore Piston Ring set x 2 #4083
  • Wrist Pin Retaining Clips x 4 #4084
  • Deluxe Stainless Steel Allen Bolt Kit #462
  • Three Bond Gasket Sealer #9012
  • OEM Style Master Link #4460

Optional Tools & Parts @ Discount Prices:

  • Camshaft Gear Cushion Rubbers #4090 (sets of 4)
  • Cylinder Hone (CB / CL450 / CB500T) #9017
  • Impact Driver #9018
  • Rotor Puller #9000
  • Oil Rotor Nut Tool #9005
  • Valve Spring Compressor #9022
  • 0-1" Micrometer #9036
  • 1-2" Micrometer #3037
  • Telescoping Snap Gauge #9038
  • Small Hole Gauge #9039
  • Dial Bore Gauge #9040
  • Snap Ring Pliers #9049

Installation Tip: Clean your sealing surfaces well and scrap off all pieces of the old gaskets material with any blobs of gasket sealer that have been generously used. A  coat of white grease will keep gaskets that get removed frequently from sticking (side covers) Measure the ID of the cylinders to see if they are within service limits, the factory service manual lists the engine measurements throughout the engine service chapter of the 450 manual. If so then cylinders can be honed to seat the new rings.Use motor oil when honing the cylinders and wash thoroughly in hot water and dish soap after to remove all honed residue. Top and bottom rings are the same, orient them with the index mark facing upwards. The impact driver will make quick work of the original JIS Phillips screws from the crankcase, which will be replaced by the stainless steel Allen bolts. Apply anti-seize on the threads of the bolts when installing.

This Honda Overhaul Bundle Fits These Honda Motorcycles
1974197519761977
360CB360GCB360TCB360T
CL360K0CL360K1CJ360TCJ360T

Related Items

Recently Viewed Items