Rear wheel bearings and dust cover for 1979 Honda CT90 K1-K9. For the CT90 K0 click here.
Wheel bearings are a heavy wear item, and an often overlooked part of your bike's performance and safety. If your rear wheel feels crunchy when you turn it, squeals when turning, is oozing or spraying grease everywhere, or if it has a lot of lateral play, then it's time to replace that wheel bearing.
We offer this high-quality rear wheel bearing kit to replace your worn, busted, OEM bearings on your vintage Honda CT90. Each kit comes with two sealed bearings with ample grease for both the drive side and brake side and a dust seal. They are a perfect match for the old OEM-style bearings and will provide you with years of trouble-free service.
Place the new bearing in the freezer for a few hours before installing. This will shrink the bearing slightly and make installation easier. Use a heat gun on the hub to expand the aluminum, making removing the old bearings and installing the new ones quicker and easier. A large socket or a tube just smaller than the new bearing's outer race should be used to drive in the new bearings. Do not press on the inner race or dust covers as you will damage the bearing while installing it.
