Part: Honda CB350G / CB360 / CB450 / CB500T / CB550 Banjo Bolt with two Crush Washers
Why You Need This: There comes a time in every Honda's life when the brakes need a total overhaul. If you're renewing parts like your master cylinder or brake caliper there's a good chance you'll need a fresh banjo bolt or two. This clean, steel bolt includes two of the the same crush washers we use on our bikes.
Installation Tip: Only use fresh brake fluid. Start bleeding with the line disconnected from the caliper. Bleed until all the air is gone from the system then connect the line to the caliper and finish the bleeding process. Using a speed bleeder will make the brake bleeding process much smoother.
