Factory-style rear shocks for Honda CB750K, CB750F & CB750A motorcycles
Note: Sold as a Pair. You will receive two shocks: one for the left side and one for the right side.
After years of use, the original shock absorbers often loose their effectiveness. If the socks on your vintage Honda CB750 (K0-K8), CB750 (F0-F3) or CB750A are showing their age it is time for an upgrade. Available in both shrouded and non-shrouded versions, our factory-style shocks will drastically improve the ride quality of your Honda CB750 while keeping your look authentic. They feature a standard spring-preload and measure 13.2" (335 mm) in length.
While installing new shocks on your Honda CB750 also consider changing the fork oil, adding a fresh set of fork seals and replacing your fork springs. For heavier riders or those seeking an upgraded suspension, check out our Ikon Performance Shocks.
Important: These shock absorbers fit the CB750 K3 & K4 series motorcycles, but the spring is lighter than the original factory shocks - adjust the preload for optimal performance.
Remove the metal spacer in the upper rubber bushing as it will not be used. Lubricate the rubber bushing with bearing grease for easy installation on the frame mount. Adjust the spring pre-load, especially when riding with a passenger. Proper preload compresses 20 to 30% of the shock's travel distance when sitting on the bike. The travel distance is measured from the bottom of the rubber bumper on the chrome shock tube to the piston seal on the lower body tube.
