Part: Ikon Performance Front Fork Springs for Honda CB360, CL360 Scrambler, CJ360
Why You Need This: Replacing your rear shocks but leaving your forks alone is a half-measure. If you're getting ready to rebuild the forks on your Honda CB360 / CL360 Scrambler / CJ360 consider these high-performance fork springs for Ikon Suspension. We worked directly with Ikon in Australia to help develop a performance front fork spring for the CB360 series of bikes. These are a Common Motor exclusive and they deliver the same proven quality you can trust from Ikon (formerly Koni) is now available to fit inside your stock 33mm fork tubes. Sold in Pairs.
To do the job right you'll need a pair of EZ install fork seals or at least some standard fork seals to keep the oil inside the forks where it belongs. These progressive rate springs are slightly stiffer than the factory springs and will be a perfect complement to any rear shock upgrade, particularly a nice set of top-quality Ikon Shock Absorbers.
Installation Tip: Upgrade your fork springs when doing a full rebuild. When rebuilding the forks from top to bottom, refer to our step-by-step rebuild guide below.
Make sure to use a graduated cylinder to measure the correct amount of fork oil needed for your motorcycle.
